Tel: +44 (0)1202 746000
Fax: +44 (0)1202 746046
E-mail:sales@marineelectrics.co.uk
Home | New Products | Catalogue Request | Terms & Conditions |Security | Postage | Contact Us
INSTRUMENTS
Ammeters - Digital | Ammeters - Analogue | Shunts/Current transformers | Voltmeters - Digital | Voltmeters - Analogue |
Frequency Meters | Hour Meters | LED Battery Monitor | Multimeters | General Battery Management
DC DIGITAL AMMETER & VOLTMETER

C-2685

Back lit digital ammeter. Displays to 1 decimal place.

Mounted on black aluminium face plate 102 x 67mm. Supplied with 100 amp shunt. Additional shunts available, see DC Shunts


£113.33
 QTY

C-2680

Back lit digital volt meter suitable for 12/24v systems. Displays to 1 decimal place.

Mounted on black aluminium face plate 102 x 67mm.


£62.24
 QTY
C-2690

Back lit digital combined ammeter and volt meter. Displays to 1 decimal place. Supplied with 100 amp shunt.

Mounted on black aluminium face plate 205 x 67mm.

£170.35
 QTY
Back to top
12V DIGITAL VOLTMETER
An easy to mount LCD digital panel meter. The module features a 4 to 25V measurement range with 100mV resolution and is powered from the signal it is measuring. Only valid readings are displayed; the module indicates "LO" at voltages below 4V and "HI" at voltages above 25V. To install, the user need only drill a single 5.5mm hole in the panel. The module is fitted to the panel by locating its threaded stud through the hole, fitting the washer and tightening the nut provided.The module'sconnecting wires pass through the hollow stud into the target application for connection. The module includes reverse polarity protection up to 30V for up to 30 seconds. Operation and accuracy at voltages above 25.0V or below 4.0V are not specified. Accuracy (overall error):
0.2 V (±1 count)
Linearity:
±1 count
Valid displayed reading*:
4.0Vdc min, 25.0Vdc max.
Resolution:
100 mVdc.
Sample rate:
3 samples/sec
Operating temp. range: 0 to 50 ¡C

Temperature stability:

 100 ppm/¡C
Supply voltage: 3Vdc min, 50Vdc max.
Supply current : 3mA max
  • 12.5mm / 0.5Õ LCD Height
  • Reverse Polarity Protection
  • 2 - wire Operation
  • Single Hole Mounting
    		• Dimensions: 44 x 21 x 6mm.
    * At voltages below 4.0V d.c., the LCD will display LO and will ultimately go blank. At Voltages in excess of 25.0V d.c., the LCD will display HI. Do NOT exceed 50V d.c., as this may damage the meter.
    C-2675
    £56.87
    		 QTY
    Back to top
    BATTERY MONITOR BM-1

    The BM-1 is designed to monitor performance of 12volt lead acid battery systems. It monitors voltage, current and number of Amp/Hours (charge or discharge), state of charge of battery and time to charge or discharge.

    There are 4 keys to select backlight, Volt/Amp/State of Charge screen, Amp hours or Time to Run

    • High contrast LCD
    • Backlit
    • Min voltage visual alarm
    • Supplied with 100A shunt, 5m of cable assembly, complete with terminals and fuse holder
      Battery capacities: 5-650 Amp Hour
      Load Current: 100 Amps max
      Charge Current: 100 Amps max
      Supply current : 3mA
      Shunt: Standard 50mV @ 100 Amps
      Dimensions: Standard 110mm sq. Clipper case
    C-2695
    £99.50
    12v
    QTY
    C-2695/24
    £99.50
    24v
    QTY
    LED BATTERY CONDITION MONITOR
    C-2671
  • Green, Amber and Red LED indicators for High, Normal and Charge.
  • Monitors 2 batteries
  • 12v.
  • 100 x 60mm.
    • £39.99
    		 QTY
    Back to top
    ANALOGUE AMMETERS

    A range of DC (moving coil) and AC (moving iron) instruments, protected to IP54, featuring high resolution scales, ideal for monitoring on-board electrical systems.

    Jewel and pivot movement for accuracy and reliability

    Single hole, single clamp fixing

    Accuracy to 1.5%

    Dimensions:
    48 x 48 x Panel cut out: 45 x 45mm 56mm.

    Also Available to special order.
    72 x 72 x 56mm. Panel cut out: 65 x 65mm

    C-3000
    DC
    Direct Connection
    £44.18
    		 QTY
    C-3004
    DC
    Direct Connection
    25-0-25A
    £66.36
    		 QTY
    C-3005
    DC
    Requires Shunt
    £54.24
    		 QTY
    C-3005/C3100
    Ammeter c/w shunt
    DC
    £88.37
    		 QTY
    C-3008
    DC
    Requires Shunt
    £66.36
    		 QTY
    C-3008/C3101
    Ammeter c/w shunt
    DC
    50-0-50A
    £100.49
    		 QTY
    C-3018/C3105
    Ammeter c/w shunt
    DC
    100-0-100A
    £100.49
    		 QTY
    C-3009
    AC
    Direct Connection
    £26.48
    		 QTY
    C-3012
    AC
    Requires Current Transformer
    £26.48
    		 QTY
    C-3012/C3200
    Ammeter c/w current transformer
    AC
    £46.16
    		 QTY
    back to top
    DC SHUNTS
    C-3100 - C-3105
    £34.13
    		QTY
    		 
    AC CURRENT TRANSFORMERS
    C-3200 - C-3204
    £19.68
    		QTY
    		 
    back to top
    ANALOGUE VOLTMETERS
    AC/DC
    Range
    		  
    C-3050
    DC
    0-15V
    £47.35
    		 QTY
    C-3051
    DC
    0-25V
    £47.35
    		 QTY
    C-3052
    DC
    10-16V
    £67.09
    		 QTY
    C-3053
    DC
    20-30V
    £67.09
    		 QTY
    C-3054
    DC
    0-30V
    £47.35
    		 QTY
    C-3060
    AC
    0-300V
    £29.85
    		 QTY
    52mm ILLUMINATED ROUND VOLTMETER
    C-3400
    12v
    Scale 8-16v
    £31.67
    		 QTY
    C-3401
    24v
    Scale 18-32v
    £35.19
    		 QTY
    cutout: 52mm
    back to top
    FREQUENCY METER
    C-3080
    AC
    45-65hz
    £67.03
    		 QTY
    Other frequencies available on request
    back to top

     

     

     

    HOUR METER
    DIGITAL HOUR METER

    C-3090

    12V/24V

    £43.02
    QTY

    C-3091

    12V/24V

    Cutout: 50mm

    £39.41

    		 QTY
    back to top
    MULTIMETERS

    D-7211
    A compact auto ranging digital multimeter with 3.5 digit display and diode buzzer for continuity checks.

    		DC Volts: 4vdc(+-0.55%) 40/400/600
    +-0.8%)
    £18.21
    		 QTY

    		AC Volts: 4/40/400/600 (+-0.8%)
    DC Current: 40/400mA (+-0.2%)
    AC Current: 40/400mA (+-3.5%)
    Resistance: 400/4k/40k/400k/4M Ohms (+-1.5%)
    Power: 3V. 2 x SR44
    Dimensions:
    Weight:     		70x120x18mm
    110g inc battery
    back to top
    D-7200
    Analogue multimeter with buzzer for continuity checks. Tilt stand    		 DC Volts: 2.5/10/50/250/1000V
    £33.49
    		 QTY
    AC Volts: 10/50/250/1000V
    DC Current: 5mA/50mA/500mA/10A
    AC Current: 40/400mA+-3.5%
    Resistance: 10k/100k/10M Ohms
    Power: 3V. 2 x AA
    Dimensions: 148x97x38mm
    back to top